The Five Failure Modes, and How to Read the Broken Blade Every shop has this conversation. Someone fishes a shattered disc out of the chip tray, says the saw was junk, and orders another one. Three weeks later: same tray, same conversation, same conclusion. The saw...
Selecting the right cutting tool directly impacts machining efficiency, surface finish, and production costs. While both high-speed steel (HSS) and carbide slitting saws are widely used in the metalworking industry, each is designed to perform best under specific...
When to Sharpen or Replace Shear Blades: Rotation, Regrinding Limits, and the Real Cost of Running Dull Quick answer: Sharpen (or rotate) the blade the moment cut quality drops: burrs, rolled edges, or a heavier cut are the signals. Send it for regrinding once every...
Why Your Slit Edges Have Burr (and How to Fix It): A Coil Slitting Troubleshooting Guide A burred slit edge is rarely a single problem. It is a symptom, and the same ridge of displaced metal can be telling you three different things: your clearance is wrong, your...
MAXWELL SLITTER INDUSTRIES PRECISION SLITTING TOOLS SINCE 1976 On a coil slitting line, the price of a slitter knife is almost never the real cost. The real cost is the line standing still while you change it. That single fact is why the two-piece, or bi-parted, knife...
In precision manufacturing, cutting narrow, deep features has always been a notorious hurdle for engineering teams. If you attempt to machine a slot deeper than four to six times its width using a standard solid carbide endmill, you immediately run into tool...
