OptiStack
by Maxwell Slitter Industries
OptiStack PRO Capabilities (On Request)
Built to convert calculations into operator-ready setups, reduce setup errors, and speed up repeat jobs.
Available on request
Operator Setup Sheet (PDF) + Slit Cardsfaster setup + fewer operator errors
Job Save / Repeat / Clone (Job ID)repeat jobs in minutes
Spacer + Shim Inventory with Shortage Alertsprevents downtime due to missing tooling
Auto-Shim Combination Solverminimum trial-and-error on shop floor
Multi-Arbor / Turret Modelinghandles advanced slitting lines
Knife Life / Regrind Logstable quality + planned maintenance
1
Step 1 – Material & Clearance
Material-based clearance is per side as % of thickness.
mm
Recommended: 0.1 – 20 mm
Choose how aggressive or conservative clearance should be.
Clearance Summary
Select material type and thickness to see clearance.
Recommended Knife Material & Hardness
Select material type and thickness to see recommendation.
2
Step 2 – Tooling & Tolerance
mm
Used for spacer combination solver.
mm
Uniform shim for all slits.
Typical plastic shim range: 0.05 – 0.50 mm
3
Step 3 – Coil & Slit Setup
Enter coil width, then add slit widths and strip counts. View usage and efficiency below.
mm
mm
Male–Female increases clearance by 10%. Progressive: multi-pass recommended.
Job Type
Single: only one slit row is kept. Multiple: add many slit widths.
mm
mm
Optional; defaults to 0.
4
Step 4 – Calculate & Results
Job Snapshot
Usage: 0 mm (0%)
Scrap: 0 mm
Arbor Used: 0 mm (0%)
Remaining: 0 mm
Missing Inputs